As with most instruments you will want to take care of your soldering station and make sure of certain vital maintenance if you would like them to be reliable, safe tools into the future. Following a number of days using a soldering iron i have some straightforward advice which might help you to look after your equipment. The first thing to keep in mind should be to never let go of the soldering station WES51 onto something hard such as a table or maybe worse a concrete flooring. The fragile equipment in may just be broken for good, making the expensive tool worthless. To stay safe at all times lay the soldering station within your stand supplied as this can even minimize the risk of a fire starting.
It’s best to at all times keep the tip of your soldering iron clean using a damp cloth. By thinking to always solder having a dirt free tip it is easy to prolong the shelf-life of your soldering station by stopping it from oxidizing. A moist cloth is all you will need, but if you make it too wet it’s also possible to wreck the equipment. To suitably polish the Weller WES51 Soldering Station it’s also possible to use a moist sponge, certain sandpaper, and a soldering tip cleaner. Firstly turn the soldering iron on then wait for it becoming hot after that place the soldering tip into the cleaner for approximately one minute. After that use that wet cloth to scrub the iron every time you use the weller soldering iron.
The next stage is usually to sensitively abrase the top of your soldering station on top of extremely fine sanding paper - stop rubbing once it looks shiny. It’s best not to do this excessively frequently simply when your solder tip is very filthy. An added important slice of recommendation is usually to never leave the Weller soldering iron turned on for a long episode of time. Leaving it stay there set to maximum temperature for ages will spoil the heating element then lead to the soldering station not working accurately, substitution may be exceedingly expensive.